-
Applied for Onboard CAN Bus Logger;
- Support CAN-FD and CAN-HS;
- Baud Rate up to 5Mbps;
- Trigger Input connector;
- JBUS Bus interface support daisy chain connecting.
Onboard Bus Logger CANLogger-6FD, is mainly used in vehicle crash tests to collect data on the vehicle's CAN bus and provide T0 time mark. The equipment is designed according to the 6-channel standard CAN. The equipment is connected by bus. The baud rate of each channel is set before the collision. When the ARM (or SR trigger) is started, the data can be downloaded after the test.
Specification (25℃):
| Name | Unit | Value |
| Data channels | Channels | 6×CAN |
| CAN baud rate | Mbps | 5 |
| Memory | Flash | 4GB |
| Trigger Input | SR & T0 | Switch |
| Bus voltage | V | 24~55 |
| Communication | / | 以太網(wǎng) |
| Battery work time | Hours | ≥5 |
| Anti-Shock (XYZ) | ＞100g @6ms half sine | |
| Material | / | Al. Alloy |
| Weight | kg | 1.5 |
| Dimension | mm | 230×64×70 |
LED POW: JBUS Power indicator;
LED BAT：Battery On indicator;
LED ARM: ARM Status indicator;
LED SR: Start Recording indicator;
LED T0: T0 received indicator;
ETA, ETB: JBUS communication indicator.
Connector Define
CAN connector: ODU GK0L0C-P05Q;
| Pin 1 | Not Connect |
| Pin 2 | 5V-CAN |
| Pin 3 | GND-CAN |
| Pin 4 | CAN-H |
| Pin 5 | CAN-L |
LIN connector: ODU GK0L0C-P03Q
| Pin 1 | LIN Data |
| Pin 2 | 5V-LIN |
| Pin 3 | GND-LIN |
Trigger input connector: ODU GK1L0C-P05Q
| Pin 1 | Switch T0+ |
| Pin 2 | Switch T0- |
| Pin 3 | Switch SR+ |
| Pin 4 | Switch SR- |
| Pin 5 | Not Connect |
JBUS: ODU GK2L0C-P16Q is JEBOOL Standard Bus interface.
 |
CAN Bus Logger CANLogger-6FD |