-
Applied for synchronous data acquisition of sensors and signals;
-
Support 16 channels with excitation voltage;
-
20kHz sampling frequency and flash recording;
-
SR and T0 switch input connector;
-
Ethernet communication with JBUS interface;
-
UPS Battery inside, LED status indicators;
-
Dallas ID read function;
-
Compliance with SAE J211 and ISO6487.
Onboard DAS JDAS-AS16 has an anti-shock design and very suitable to apply for crash test. The DAS support 16 channels sensor input (PR, SG Bridge, Pot. or Voltage) with excitation voltage. A built-in UPS battery is used to ensure the reliability of communication and triggering. An independent trigger input can be connected to an external switch to realize start recording and T0 trigger mark.
Specification (25℃):
|
Name |
Unit |
Value |
|
Sensor Input |
Channels |
16 |
|
A/D |
bit |
16 |
|
Sampling Freq. |
kHz |
20 |
|
Signal Bandwidth |
kHz |
4 |
|
Excitation |
VDC |
5 |
|
Excitation Current |
mA |
Max. 60 |
|
Recording Time |
Sec |
384 |
|
Trigger Input |
SR, T0 |
Switch |
|
Filter |
4-order Anti-aliasing LPF |
|
Offset |
Hardware and Software |
|
Shunt |
Bridge Shunt Check |
|
Gain |
Signal Amp. Automatically |
|
Communication |
100Mbit/s Ethernet |
|
Power Supply |
VDC |
24~48 |
|
Battery Working |
Minute |
≥30 |
|
Case Material |
/ |
Al Alloy |
|
Weight |
kg |
1.5 |
|
Operation Temp. |
℃ |
5~40 |
|
Store Temp. |
℃ |
-20~40 |
Sensor Connector A1~A16: ODU GK1L0C-P07Q
|
Pin 1, Pin7 |
Not Connect |
|
Pin 2 |
Dallas ID+ |
|
Pin 3 |
Signal Input+ |
|
Pin 4 |
Excitation Voltage+ |
|
Pin 5 |
Excitation Voltage- |
|
Pin 6 |
Signal Input- |
Trigger Input TRG IN：ODU GK1L0C-P05Q：
|
Pin 1 |
Switch T0+ |
|
Pin 2 |
Switch T0- |
|
Pin 3 |
Switch SR+ |
|
Pin 4 |
Switch SR- |
|
Pin 5 |
Not Connect |
JBUS Interface：ODU GK2L0C-P16Q：
|
Pin 1，11，12 |
Power+ |
|
Pin 2，3，13 |
Power- |
|
Pin 4, 5, 6, 14 |
Ethernet |
|
Pin 7, 8 |
T0 RS485 Trigger |
|
Pin 15, 16 |
SR RS485 Trigger |
|
Pin 9 |
Trigger GND |
|
Pin 10 |
Trigger Terminal |
